4 Common Shock Bearing Installation Mistakes: Mechanic Tips

4 Common Shock Bearing Installation Mistakes

Mistake 1: Misalignment

Bearing must align with strut and tower. Misalignment causes abnormal wear.

Mistake 2: Wrong Torque

Too loose → noise; too tight → bearing deformation. Follow OEM specs.

Mistake 3: Dirty Surface

Contaminants on mounting surface cause noise and wear.

Mistake 4: No Lubrication

Some bearings need grease before installation.

Correct Steps

1. Clean mounting surfaces
2. Verify bearing model
3. Align properly
4. Tighten to spec torque
5. Test steering after install

Huami bearings come with installation instructions.